The device code you specify here is sent to the printer at the beginning of a print job. For example, you can enter a RESET escape code, which configures a printer to your requirements before you send any documents to it.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


The device code you specify here is sent to the printer at the end of a print job. You can use this device code to reset a printer to its default mode at the end of a print job.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


The device code you specify here notifies the printer of the paper size you want to use.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


The device code you specify here notifies the printer which paper tray or paper source to use for printing.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


???


Specifies the amount of nonprintable space (margin) at the top of the page.


Specifies the amount of nonprintable space (margin) at the bottom of the page.


Specifies the amount of nonprintable space (margin) on the right side of the page.


Specifies the amount of nonprintable space (margin) on the left side of the page.


Specifies that you are using millimeters (one tenth of a millimeter) as the unit of measurement.


Specifies that you are using inches (1/100 of an inch) as the unit of measurement.


Converts the Windows character set to the code page  character set you have selected for printing.


Prints 10 characters per inch. If your printer supports this font size, type the font select control code here as it is described in your printer manual.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


Prints 12 characters per inch. If your printer supports this font size, type the font select control code here as it is described in your printer manual.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


Prints 16 or 16.7 characters per inch. If your printer supports this font size, type the font select control code here as it is described in your printer manual.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


Starts double-width font printing. For example, if you have set a control code for a font size of 12 cpi, you could add a control code here to enable you to print at 6 cpi. If your printer supports double-width font printing, type the control code here as it is described in your printer manual.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


Ends double-width font printing. If your printer supports double-width font printing (and you have entered the control code for Double Wide On above), type the control code to disable font bolding here as it is described in your printer manual.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


Starts bold text printing. If your printer supports font bolding , type the control code to enable font bolding here as it is described in your printer manual.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


Ends bold text printing. If your printer supports font bolding (and you have entered the control code for Bold On above), type the control code to disable font bolding here as it is described in your printer manual.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


Starts underlined text printing. If your printer supports font underlining, type the control code to enable font underlining here as it is described in your printer manual.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.


Ends underlined text printing. If your printer supports font underlining (and you have entered the control code for Underline On above), type the control code to disable font underlining here as it is described in your printer manual.

The control code, or control sequence, is one or more characters sent to the printer to initiate an action. The characters may be printable (like the alphanumeric keys on your keyboard) or non-printable (like the control characters such as the ESC key). Enter printable characters by typing them directly in the text box. Enter non-printable characters using their hexidemical (base 16) format.

Following are some common control characters and their hexadecimal equivalents:

ESC is entered as <1B>

`<' is entered as <3C>

NUL is entered as <00>

Line Feed is entered as <0A>

Form Feed is entered as <0C>

Carriage Return is entered as <0D>

If your printer manual specifies control codes using hexadecimal numbers, you may enter them directly enclosed by angle brackets.